Skateboard-P Effects Pedal Kit

Description

Version 0.0

Based on the PedalPCB Terrarium circuit board.

• 6 Potentiometers
• 4 Toggle Switched
• 1 LED
• 1 Footswitch
• Mono

Version 0.1

Based on the Guitar Pedal 125b project by Keith Shepherd

• OLED Display
• Rotary Encoder for Display Navigation
• 6 Potentiometers
• Up to 2 Foot switches
• Up to 2 Leds
• Standard 9v center pin negative power jack
• 125B size pedal board friendly enclosure!
• Buffered Stereo Input and Outputs for Guitar Level signals
• Relay based “True Bypass” switching
• TRS Mini MIDI Input and Outputs

itK – Skateboard-P

Powered by Daisy Seed

Community and Support

Here are some ways to get support and connect with other users and developers.

• GitHub – https://github.com/kennethjacksontech – You can submit an issue at GitHub on the repo that best matches your topic.
• KennethJackson.Tech Wiki – https://github.com/KennethJacksonTech/Wiki/wiki
• Skateboard Web Programmer (Site) – https://kennethjackson.tech/programmer/ – Requires Google Chrome
• Skateboard Web Programmer (GitHub)- https://kennethjacksontech.github.io/Programmer/ – Requires Google Chrome
• Powered by – Electro-Smith Daisy Seed

Logic PCB

Height from top of case 10mm

Distance from side of case 1mm

3-Knobs

1-Toggle Switch

I/O PCB

Height from top of case 22mm

Distance from side of case 1mm

2-1/4 Stereo Jacks

1-Switch 3P3T

1-LED

https://docs.pedalpcb.com/project/Terrarium.pdf

Enclosure

125B

https://www.taydaelectronics.com/black-a-pedalpcb-125b-bare-drilled-enclosure-type-6-1.html

https://www.taydaelectronics.com/red-a-pedalpcb-125b-bare-drilled-enclosure-type-6-1.html

BLACK Drilled Enclosure for PedalPCB 3 Knob Type 1

RED Drilled Enclosure for PedalPCB 3 Knob Type 1

Version 0.0 BOM – Bill of Materials

LOCATION	VALUE	TYPE
R1	1M	Resistor, 1/4W
R2	1M	Resistor, 1/4W
R3	1M	Resistor, 1/4W
R4	100R	Resistor, 1/4W
R5	1K	Resistor, 1/4W
R6	100K	Resistor, 1/4W
R7	1K	Resistor, 1/4W
R8	1K	Resistor, 1/4W
R9	1M	Resistor, 1/4W
C1	100p	Ceramic capacitor
C2	1u	MLCC capacitor, 7.2 x 2.5mm
C3	1u	MLCC capacitor, 7.2 x 2.5mm
C4	100n	Film capacitor, 7.2 x 2.5mm
C5	100n	Film capacitor, 7.2 x 2.5mm
C6	1u	MLCC capacitor, 7.2 x 2.5mm
C7	1n	Film capacitor, 7.2 x 2.5mm
C8	100n	Film capacitor, 7.2 x 2.5mm
C9	100n	Film capacitor, 7.2 x 2.5mm
C100	100u	Electrolytic capacitor, 5mm
D100	1N5817	Schottky diode, DO-41
IC1	TL072	Dual op-amp, DIP8
IC2	L78L05	Linear voltage regulator, 5V
SEED1		Electro-Smith Daisy Seed Module
POT1	B10K	16mm right-angle PCB mount pot
POT2	B10K	16mm right-angle PCB mount pot
POT3	B10K	16mm right-angle PCB mount pot
POT4	B10K	16mm right-angle PCB mount pot
POT5	B10K	16mm right-angle PCB mount pot
POT6	B10K	16mm right-angle PCB mount pot
SW1		Toggle switch, SPDT, 2-position (ON/ON)
SW2		Toggle switch, SPDT, 2-position (ON/ON)
SW3		Toggle switch, SPDT, 2-position (ON/ON)
SW4		Toggle switch, SPDT, 2-position (ON/ON)
FS1		Foot switch, Momentary SPST
FS2		Foot switch, Momentary SPSTSPST
PINHEADER		20-pin Female 2.54mm Pinheader

Bill of Materials Version 0.1

Comment	Designator	Footprint	JLCPCB Part #（optional）
10uF	C1, C4, C7, C8, C11, C12, C15, C16	805	C15850
100nF	C2, C3, C5, C6, C13, C14, C17	805	C49678
2.2nF	C9, C10	805	C28260
10nF	C18, C19	805	C1710
1N5817	D1	SOD-123	C727113
1N4148W	D2	SOD-123	C81598
1N4007W	D3, D4	SOD-123FL	C108803
DC-005-2.5A-2.0	J1		C136744
NMJ6HCD2	J2, J4		C368502
PJ-320A	J3, J5		C2884926
1×20 Through Hole Header	J6, J7		C50984
G6K-2G-Y DC5	K1, K2	SMD,6.5x10mm	C397140
SS8050	Q1	SOT-23-3	C2150
2M	R1, R2, R4, R5, R9-12, R15, R16	805	C26112
100K	R3, R6	805	C149504
100R	R13, R14	805	C17408
220R	R17	805	C17557
33R	R19	805	C17634
10R	R18	805	C17415
470R	R20	805	C17710
1K	R21-25	805	C17513
3.3K	R7, R8	805	C26010
10K	R26-29	805	C17414
LD1117S50CTR	U1	SOT-223-3	C81157
MCP6004T-I/SL	U2	SOIC-14	C7378
OPA1652AIDR	U3	SOIC-8	C30025
H11L1	U4	SOP-6-2.54mm	C78589
CPC1018N	U5, U6	SOP-4-2.54mm	C133069